I still need help Mixing

[mordecai1989]

appreciate it.

[admin]

Had another look today. Volume wise your mix is peaking around -10 so that will deffinitly make it sound quite a bit lower in volume when comparing. So maybe your your final output is hitting at 0 (actually a little bit less like -0.3)

There's some type of distortion or grungyness on the hats, maybe you're going for a dirty feel but I'd say this is over done so take a look at that. The highs should be a smoother than they are currently.

Also the kick and bass could be compressed together a little to tighten them up.

[mordecai1989]

how do i get it leveled??

Yea i did the open hat this way on purpose to give it little fill.

Well the kick are cmpress but i forgot to tell you the whole mix is not compress it why sounds a little dry

[admin]

Just use a limiter that comes with whatever DAW you are using. But you can start just by raining the master fader up but make sure it doesn't clip.

I would back off on hat effect, a little is ok but sounds too much to me right now.

[mordecai1989]

my DAW dont have a limiter it has Gate,Compresor
How do i use these on my whole mix?

& which one do i do 1st rase the master level the compress are gate?

[przechuy]

Hey buddy


http://www.kjaerhusaudio.com/downloads/p...r_v106.zip

Here you have free limiter from kjaerhus,decent stuff for free.


Also,you can download all plugins from "classic" series ,because they are for free.

http://www.kjaerhusaudio.com/download.php