Posts: 12
Threads: 3
Joined: Feb 2009
I wanna know is it still posble to mix & master
this way
I use zoom streetbox 246 for my drums the drums are all mix
so i do is make the drum loop & send it into the computer
my qustion is can i mix & master without haveing my drums on diffrent track?
appreciate it
Posts: 1,251
Threads: 137
Joined: Jun 2007
Hi,
If you have your drums all on one track then it will be much more difficult. What I would suggest is bouncing your drums one sound at a time. So kick, snare, hats etc.. Then you will have a lot more flexibility later. You can use midi clock to keep it in time or just line up the tracks in your DAW.
Hope this answers your question.
Jesse
Posts: 12
Threads: 3
Joined: Feb 2009
Well the sounds in zoom streetbox are all mix. I just make the beat than sync it into the computer.
Posts: 1,251
Threads: 137
Joined: Jun 2007
There might be a way in the Zoom to mute out the sounds so only one plays at a time. Or you could use volumes to stop some of them playing.
Posts: 12
Threads: 3
Joined: Feb 2009
no i look.. there only 2 stereo outs & one the the stereo outs is also a mono out put..
Well I ask the zoom company if i need mix the drums & they say no
The streetboxx also has compresser/Eq & reverb
I also try sync each sound on sepreat tracks but recreating the beat is hard dependeing on your software..
Posts: 1,251
Threads: 137
Joined: Jun 2007
Is there a volume control for each sound though? Normally you can mix inside of the unit even if there is only a stereo out. I used to do this on a drum machine I had many years ago.
If not then only option would be to delete some of the sounds from the beat one at a time and record it like that.
